• 918博天堂·(中国区)首页

    4 Port Fast Ethernet Smart POE Switch

    • 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
    • Total PoE Power Budget 45W
    • Support 802.1Q VLAN
    • Support PoE watchdog to detect and restart the cameras that do not respond
    • Support STP/RSTP Loop prevention
    • Support cable detection to locate failure
    • Up to 300 m Long Range PoE Transmission
    • 6 KV Surge Protection
    View Less
    View more

    Modelos disponibles:

    DS-3E1105P-EI/M
    DS-3E1105P-EI/M

    Especificación

    • General
    • CarcasaMetal material, fan-free design
    • Peso neto0.26 kg (0.573 lb)
    • Peso bruto0.75 kg (1.65 lb)
    • Dimensiones (W x H x D)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
    • Temperatura de funcionamiento0 °C to 40 °C (32 °F to 104 °F)
    • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
    • Condiciones de humedad5% to 95% (no condensation)
    • Humedad relativa5% to 95% (no condensation)
    • Fuente de alimentación54VDC, 0.92A
    • Modo de instalaciónDesk-Mounted,Wall-Mounted
    • Max. El consumo de energía50 W
    • Consumo de energía en inactivo5 W
    • Surge Protection6 KV
    • Parámetros de red
    • Puertos4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
    • Tabla de direcciones MAC2 K
    • Capacidad de conmutación1.2 Gbps
    • Tasa de reenvío de paquetes0.89 Mpps
    • Caché interna768 Kbits
    • Fuente de alimentación PoE
    • PoE StandardIEEE 802.3af,IEEE 802.3at
    • Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
    • Puerto PoEPoE: Ports 1 to 4
    • Max. Puerto de alimentación30 W
    • PoE Power Budget45 W
    • Función de software
    • Port IsolationPorts 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
    • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
    • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
    • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
    • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
    • Largo alcancePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
    • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
    • System MaintenanceSupport remote management via Hik-Partner Pro.
    • VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
    • Certificaciones
    • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
    • SeguridadCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
    • QuímicaCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
    *Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

    Especificación

    Especificación
    General
    • CarcasaMetal material, fan-free design
    • Peso neto0.26 kg (0.573 lb)
    • Peso bruto0.75 kg (1.65 lb)
    • Dimensiones (W x H x D)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
    • Temperatura de funcionamiento0 °C to 40 °C (32 °F to 104 °F)
    • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
    • Condiciones de humedad5% to 95% (no condensation)
    • Humedad relativa5% to 95% (no condensation)
    • Fuente de alimentación54VDC, 0.92A
    • Modo de instalaciónDesk-Mounted,Wall-Mounted
    • Max. El consumo de energía50 W
    • Consumo de energía en inactivo5 W
    • Surge Protection6 KV
    Parámetros de red
    • Puertos4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
    • Tabla de direcciones MAC2 K
    • Capacidad de conmutación1.2 Gbps
    • Tasa de reenvío de paquetes0.89 Mpps
    • Caché interna768 Kbits
    Fuente de alimentación PoE
    • PoE StandardIEEE 802.3af,IEEE 802.3at
    • Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
    • Puerto PoEPoE: Ports 1 to 4
    • Max. Puerto de alimentación30 W
    • PoE Power Budget45 W
    Función de software
    • Port IsolationPorts 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
    • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
    • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
    • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
    • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
    • Largo alcancePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
    • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
    • System MaintenanceSupport remote management via Hik-Partner Pro.
    • VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
    Certificaciones
    • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
    • SeguridadCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
    • QuímicaCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
    *Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

    Firmware

    Aplicado a:
    DS-3E1105P-EI/M
    Para una mejor experiencia de usuario, le recomendamos encarecidamente que actualice su dispositivo al más reciente firmware lo antes posible.
    Ventas
    Soporte Técnico
    Servicio en Línea
    Donde comprar
    Contáctenos
    Hik-Partner Pro close
    Hik-Partner Pro
    Security Business Assistant. At Your Fingertips. Learn more
    Hik-Partner Pro
    Scan and download the app
    Download
    Hik-Partner Pro
    Hik-Partner Pro
    back to top

    Get a better browsing experience

    You are using a web browser we don』t support. Please try one of the following options to have a better experience of our web content.