918博天堂·(中国区)首页

8 Port Fast Ethernet Smart Harsh POE Switch

  • Visualized topology management.
  • Network health monitor.
  • Layer 2 features: PoE watchdog, STP/RSTP, VLAN, SNMP, QoS, ERPS, etc.
  • -30°C to 65°C wide temperature range in harsh environment.
View Less
View more
Data Sheet
Sales Inquiry

Available models:

DS-3T1310P-SI/HS
DS-3T1310P-SI/HS

Especificación

  • General
  • CarcasaMetal material
  • Peso neto0.6 kg (1.3 lb)
  • Peso bruto1.2 kg (2.6 lb)
  • Dimensiones (W x H x D)197.00 mm × 114.20 mm × 42.20 mm (7.70'' × 4.40'' × 1.60'')
  • Temperatura de funcionamiento-30 °C to 65 °C (-22 °F to 149 °F)
  • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
  • Condiciones de humedad5% to 95% (no condensation)
  • Humedad relativa5% to 95% (no condensation)
  • Fuente de alimentación48VDC, 2.5A
  • Modo de instalaciónDesk-Mounted,Rail
  • Max. El consumo de energía120 W
  • Consumo de energía en inactivo10 W
  • Surge Protection6 kV
  • Parámetros de red
  • Puertos8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
  • Tabla de direcciones MAC16 K
  • Capacidad de conmutaciónWhole-Device Performance: 9.2 Gbps Port Performance: 5.6 Gbps
  • Tasa de reenvío de paquetesWhole-Device Performance: 6.84 Mpps Port Performance: 4.17 Mpps
  • Caché interna4 Mbits
  • Fuente de alimentación PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • Puerto PoEPoE: Ports 1 to 8
  • Max. Puerto de alimentación30 W
  • PoE Power Budget110 W
  • Función de software
  • Largo alcancePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
  • QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group(s).
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
  • Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
  • DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
  • Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
  • Certificaciones
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020)
  • SeguridadCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • QuímicaCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Especificación

Especificación
General
  • CarcasaMetal material
  • Peso neto0.6 kg (1.3 lb)
  • Peso bruto1.2 kg (2.6 lb)
  • Dimensiones (W x H x D)197.00 mm × 114.20 mm × 42.20 mm (7.70'' × 4.40'' × 1.60'')
  • Temperatura de funcionamiento-30 °C to 65 °C (-22 °F to 149 °F)
  • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
  • Condiciones de humedad5% to 95% (no condensation)
  • Humedad relativa5% to 95% (no condensation)
  • Fuente de alimentación48VDC, 2.5A
  • Modo de instalaciónDesk-Mounted,Rail
  • Max. El consumo de energía120 W
  • Consumo de energía en inactivo10 W
  • Surge Protection6 kV
Parámetros de red
  • Puertos8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
  • Tabla de direcciones MAC16 K
  • Capacidad de conmutaciónWhole-Device Performance: 9.2 Gbps Port Performance: 5.6 Gbps
  • Tasa de reenvío de paquetesWhole-Device Performance: 6.84 Mpps Port Performance: 4.17 Mpps
  • Caché interna4 Mbits
Fuente de alimentación PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • Pin de alimentación PoE8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • Puerto PoEPoE: Ports 1 to 8
  • Max. Puerto de alimentación30 W
  • PoE Power Budget110 W
Función de software
  • Largo alcancePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
  • QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group(s).
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
  • Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
  • DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
  • Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Certificaciones
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020)
  • SeguridadCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • QuímicaCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Resources

Technical documents

Data Sheet
Quick Start Guide
User Manual
For better user experience, we highly recommend you to update your device to the latest firmware asap.
Aplicado a:
DS-3T1310P-SI/HS
Ventas
Asistencia técnica
Subscripción de la Newsletter
Online Service
Dónde comprar
Website Feedback
Contáctenos
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Download
Hik-Partner Pro
Hik-Partner Pro

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.