918博天堂·(中国区)首页

24 Port Gigabit Smart POE Switch

  • 24 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
  • IEEE 802.3at/af standard for PoE ports.
  • Network topology management, alarm push, network health monitor.
  • 6 KV surge protection for PoE ports.
  • AF/AT camera can reach up to 300 m in extend mode.
  • PoE watchdog to auto detect and restart the cameras that do not respond.
  • Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.
View Less
View more

Available models:

DS-3E1526P-SI

Especificación

  • General
  • CarcasaMetal material
  • Peso neto2.975 kg (6.56 lb)
  • Peso bruto3.535 kg (7.79 lb)
  • Dimensiones (W x H x D)440.00 mm × 44.00 mm × 221.00 mm (17.32'' × 1.73'' × 8.70'')
  • Temperatura de funcionamiento0 °C to 45 °C (0 °F to 113 °F)
  • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
  • Condiciones de humedad5% to 95% (no condensation)
  • Humedad relativa5% to 95% (no condensation)
  • Fuente de alimentación100 to 240 VAC, 50/60 Hz, Max. 6.3 A
  • Modo de instalaciónRack (equipped with mounting ears)
  • Max. El consumo de energía400 W
  • Consumo de energía en inactivo30 W
  • Surge Protection6 KV
  • Parámetros de red
  • Puertos24 × Gigabit PoE port,2 × Gigabit fiber optical port
  • Tabla de direcciones MAC8 K
  • Capacidad de conmutación56 Gbps
  • Tasa de reenvío de paquetes41.66 Mpps
  • Caché interna4.1 Mbits
  • Fuente de alimentación PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • Pin de alimentación PoEEnd-span: 1/2(+), 3/6(-);
  • Puerto PoEPoE: Ports 1 to 24
  • Max. Puerto de alimentación30 W
  • PoE Power Budget370 W
  • Función de software
  • Largo alcancePorts 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 24: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 24: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
  • QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
  • System MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
  • Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
  • Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
  • Certificaciones
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
  • SeguridadUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Especificación

Especificación
General
  • CarcasaMetal material
  • Peso neto2.975 kg (6.56 lb)
  • Peso bruto3.535 kg (7.79 lb)
  • Dimensiones (W x H x D)440.00 mm × 44.00 mm × 221.00 mm (17.32'' × 1.73'' × 8.70'')
  • Temperatura de funcionamiento0 °C to 45 °C (0 °F to 113 °F)
  • Temperatura de almacenamiento-40 °C to 85 °C (-40 °F to 185 °F)
  • Condiciones de humedad5% to 95% (no condensation)
  • Humedad relativa5% to 95% (no condensation)
  • Fuente de alimentación100 to 240 VAC, 50/60 Hz, Max. 6.3 A
  • Modo de instalaciónRack (equipped with mounting ears)
  • Max. El consumo de energía400 W
  • Consumo de energía en inactivo30 W
  • Surge Protection6 KV
Parámetros de red
  • Puertos24 × Gigabit PoE port,2 × Gigabit fiber optical port
  • Tabla de direcciones MAC8 K
  • Capacidad de conmutación56 Gbps
  • Tasa de reenvío de paquetes41.66 Mpps
  • Caché interna4.1 Mbits
Fuente de alimentación PoE
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • Pin de alimentación PoEEnd-span: 1/2(+), 3/6(-);
  • Puerto PoEPoE: Ports 1 to 24
  • Max. Puerto de alimentación30 W
  • PoE Power Budget370 W
Función de software
  • Largo alcancePorts 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • Port IsolationPorts 1 to 24: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE WatchdogPorts 1 to 24: auto detect and restart the cameras that do not respond.
  • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
  • QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
  • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP.
  • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device.
  • System MaintenanceRemote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
  • Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
  • Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
Certificaciones
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
  • SeguridadUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • QuímicaCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Resources

Technical documents

Quick Start Guide
User Manual
For better user experience, we highly recommend you to update your device to the latest firmware asap.
Aplicado a:
DS-3E1526P-SI
Ventas
Asistencia técnica
Subscripción de la Newsletter
Online Service
Dónde comprar
Website Feedback
Contáctenos
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Download
Hik-Partner Pro
Hik-Partner Pro

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.