918博天堂·(中国区)首页

Distributed Vibration Fiber-Optic Sensing Server 5KM Dual-Ch

  • Supports dual channel DAS vibration fiber.
  • Supports long-distance detection with a single-channel detection distance up to 5 km.
  • Supports simultaneous positioning and monitoring of multiple vibration points with high positioning accuracy of ± 5 m, frequency response range from 10 Hz to 5 kHz, and alarm response time ≤ 2 s.
  • Effectively monitors intrusion in different scenarios including climbing, crossing, and excavation, reports information including the alarm type, time, latitude and longitude, and alarm level, and processes alarm events.
  • Supports setting parameters for the scenario, sensitivity, and more with the integrated Hikvision algorithms.
  • Strong environmental adaptability. With passive and flexible characteristics, the fiber can be installed in various complex terrains, not restricted by power supply conditions. It can withstand harsh environments such as moisture, temperature variations, and is resistant to ammonia, chlorine, salt spray, acid rain, and more.
View Less
View more

Available models:

DS-QFV0502

Specification

  • Basic Parameter
  • Fiber TypeSingle mode (ITU-T G.652D)
  • Channel2
  • Single-Channel Detection Range5km
  • Positioning Accuracy5km：±5m
  • Frequency Response10Hz to 5kHz
  • Unit≤ 600 per channel
  • Alarm Response Time≤ 2s
  • Function
  • Alarm TriggerIntrusion alarm, Fiber cut alarm, Tampering alarm
  • LED IndicatorPower indicator: Solid blue: Device is connected to the power supply and powers on Blue light is not on: Device powers off Status indicator: Solid blue: Device works normally without any error Red light flashes slowly: Wired network error Solid red: Device error (including all-in-one model error, FPGA exception, HDD error, tampering alarm)
  • BuzzerStay buzzing for tampering alarm
  • SwitchRocker switch for power
  • Communication
  • Communication MethodWired communication
  • Interface
  • Fiber Interface2 FC/APC fiber interfaces
  • Power Interface1 power input interface with 100~240V AC power input
  • Function Interface1 1000 M network interface, 1 RS-232 interface, 1 RS-485 interface, 2 USB 3.0 interfaces, 1 3.5 mm audio interface
  • Alarm Out1 relay output
  • General
  • MaterialMetal
  • Power100-240V～50/60Hz 1.4A
  • ColorBlack
  • Power Consumption< 60 W
  • Operating Humidity0% to 93% (± 2%)
  • Laser Classification Class 1
  • Dimension67 mm × 483 mm × 443.5 mm (2.63" × 19.02" × 17.46")
  • Package Dimension186 mm x 600 mm x 580 mm (7.32" × 23.62" × 22.83")
  • With Package WeightApprox. 10.5 kg (23.15 lb.)
  • WeightApprox. 8.2 kg (18.08 lb.)
  • Packing ListDevice × 1 Cable × 1 Fiber optic patch cord x 2 Flange dust cap x 2 Green terminal block connecter × 2 Quick Start Guide × 1
  • Operating Temperature-15 °C to 55 °C (5 °F to 131 °F)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Specification

Specification
Basic Parameter
  • Fiber TypeSingle mode (ITU-T G.652D)
  • Channel2
  • Single-Channel Detection Range5km
  • Positioning Accuracy5km：±5m
  • Frequency Response10Hz to 5kHz
  • Unit≤ 600 per channel
  • Alarm Response Time≤ 2s
Function
  • Alarm TriggerIntrusion alarm, Fiber cut alarm, Tampering alarm
  • LED IndicatorPower indicator: Solid blue: Device is connected to the power supply and powers on Blue light is not on: Device powers off Status indicator: Solid blue: Device works normally without any error Red light flashes slowly: Wired network error Solid red: Device error (including all-in-one model error, FPGA exception, HDD error, tampering alarm)
  • BuzzerStay buzzing for tampering alarm
  • SwitchRocker switch for power
Communication
  • Communication MethodWired communication
Interface
  • Fiber Interface2 FC/APC fiber interfaces
  • Power Interface1 power input interface with 100~240V AC power input
  • Function Interface1 1000 M network interface, 1 RS-232 interface, 1 RS-485 interface, 2 USB 3.0 interfaces, 1 3.5 mm audio interface
  • Alarm Out1 relay output
General
  • MaterialMetal
  • Power100-240V～50/60Hz 1.4A
  • ColorBlack
  • Power Consumption< 60 W
  • Operating Humidity0% to 93% (± 2%)
  • Laser Classification Class 1
  • Dimension67 mm × 483 mm × 443.5 mm (2.63" × 19.02" × 17.46")
  • Package Dimension186 mm x 600 mm x 580 mm (7.32" × 23.62" × 22.83")
  • With Package WeightApprox. 10.5 kg (23.15 lb.)
  • WeightApprox. 8.2 kg (18.08 lb.)
  • Packing ListDevice × 1 Cable × 1 Fiber optic patch cord x 2 Flange dust cap x 2 Green terminal block connecter × 2 Quick Start Guide × 1
  • Operating Temperature-15 °C to 55 °C (5 °F to 131 °F)
*Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

Download Center

Firmware

Applied to:
DS-QFV0502
For better user experience, we highly recommend you to update your device to the latest firmware asap.
Sales
Technical Support
Others
Online Service
Contact Us
Hik-Partner Pro close
Hik-Partner Pro
Security Business Assistant. At Your Fingertips. Learn more
Hik-Partner Pro
Scan and download the app
Download
Hik-Partner Pro
Hik-Partner Pro
back to top

Get a better browsing experience

You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.