918博天堂·(中国区)首页

    8 Port Fast Ethernet Smart POE Switch

    • 8 × 100 Mbps PoE RJ45 port, 1 × gigabit network RJ45 port.
    • IEEE 802.3at/af standard for PoE ports.
    • Network topology management, alarm push, network health monitor.
    • 6 kV surge protection for PoE ports.
    • Up to 300 m long-range transmission.
    • AF/AT camera can reach up to 300 m in extend mode.
    View Less
    View more

    Available models:

    DS-3E1309P-EI

    Specification

    • General
    • ShellMetal material, fan-free design
    • Net Weight0.35 kg (0.77 lb)
    • Gross Weight1.114 kg (2.45 lb)
    • Dimensions (W × H × D)170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
    • Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
    • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
    • Operating Humidity5% to 95% (no condensation)
    • Relative Humidity5% to 95% (no condensation)
    • Power Supply54VDC，2.22A
    • Installation ModeDesk-Mounted,Wall-Mounted
    • Max. Power Consumption120 W
    • Power Consumption in Idle10 W
    • Surge Protection6 KV
    • Network Parameters
    • Ports8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
    • MAC Address Table16 K
    • Packet Forwarding Rate4.17 Mpps
    • Internal Cache4 Mbits
    • Switching Capacity5.6 Gbps
    • PoE Power Supply
    • PoE StandardIEEE 802.3af,IEEE 802.3at
    • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
    • PoE PortPoE: Ports 1 to 8
    • Max. Port Power30 W
    • PoE Power Budget110 W
    • Software Function
    • Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
    • Link Aggregation\
    • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
    • System MaintenanceSupport remote upgrade, recovering default parameters, viewing logs, configuring basic network parameters.
    • Approval
    • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
    • SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
    • ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
    *Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

    Specification

    Specification
    General
    • ShellMetal material, fan-free design
    • Net Weight0.35 kg (0.77 lb)
    • Gross Weight1.114 kg (2.45 lb)
    • Dimensions (W × H × D)170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
    • Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
    • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
    • Operating Humidity5% to 95% (no condensation)
    • Relative Humidity5% to 95% (no condensation)
    • Power Supply54VDC，2.22A
    • Installation ModeDesk-Mounted,Wall-Mounted
    • Max. Power Consumption120 W
    • Power Consumption in Idle10 W
    • Surge Protection6 KV
    Network Parameters
    • Ports8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
    • MAC Address Table16 K
    • Packet Forwarding Rate4.17 Mpps
    • Internal Cache4 Mbits
    • Switching Capacity5.6 Gbps
    PoE Power Supply
    • PoE StandardIEEE 802.3af,IEEE 802.3at
    • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
    • PoE PortPoE: Ports 1 to 8
    • Max. Port Power30 W
    • PoE Power Budget110 W
    Software Function
    • Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
    • Link Aggregation\
    • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
    • System MaintenanceSupport remote upgrade, recovering default parameters, viewing logs, configuring basic network parameters.
    Approval
    • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
    • SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
    • ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
    *Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

    Firmware

    Applied to:
    DS-3E1309P-EI
    For better user experience, we highly recommend you to update your device to the latest firmware asap.
    Contact Sales
    Technical Support
    Online Service
    Subscribe Newsletter
    Where to Buy
    Website Feedback
    Contact Us
    Hik-Partner Pro close
    Hik-Partner Pro
    Security Business Assistant. At Your Fingertips. Learn more
    Hik-Partner Pro
    Scan and download the app
    Download
    Hik-Partner Pro
    Hik-Partner Pro
    back to top

    Get a better browsing experience

    You are using a web browser we don』t support. Please try one of the following options to have a better experience of our web content.