• 918博天堂·(中国区)首页

    Distributed Vibration Fiber-Optic Sensing Server 5KM Dual-Ch

    • Supports dual channel DAS vibration fiber.
    • Supports long-distance detection with a single-channel detection distance up to 5 km.
    • Supports simultaneous positioning and monitoring of multiple vibration points with high positioning accuracy of ± 5 m, frequency response range from 10 Hz to 5 kHz, and alarm response time ≤ 2 s.
    • Effectively monitors intrusion in different scenarios including climbing, crossing, and excavation, reports information including the alarm type, time, latitude and longitude, and alarm level, and processes alarm events.
    • Supports setting parameters for the scenario, sensitivity, and more with the integrated Hikvision algorithms.
    • Strong environmental adaptability. With passive and flexible characteristics, the fiber can be installed in various complex terrains, not restricted by power supply conditions. It can withstand harsh environments such as moisture, temperature variations, and is resistant to ammonia, chlorine, salt spray, acid rain, and more.
    View Less
    View more

    Available models:

    DS-QFV0502

    Specifikace

    • Basic Parameter
    • Typ vláknaSingle mode (ITU-T G.652D)
    • Channel2
    • Single-Channel Detection Range5km
    • Positioning Accuracy5km：±5m
    • Frequency Response10Hz to 5kHz
    • Unit≤ 600 per channel
    • Alarm Response Time≤ 2s
    • Funkce
    • Spouštěč alarmuIntrusion alarm, Fiber cut alarm, Tampering alarm
    • Indikátor LEDPower indicator: Solid blue: Device is connected to the power supply and powers on Blue light is not on: Device powers off Status indicator: Solid blue: Device works normally without any error Red light flashes slowly: Wired network error Solid red: Device error (including all-in-one model error, FPGA exception, HDD error, tampering alarm)
    • BuzzerStay buzzing for tampering alarm
    • SwitchRocker switch for power
    • Komunikace
    • Způsob komunikaceWired communication
    • Rozhraní
    • Vláknové rozhraní2 FC/APC fiber interfaces
    • Napájecí rozhraní1 power input interface with 100~240V AC power input
    • Function Interface1 1000 M network interface, 1 RS-232 interface, 1 RS-485 interface, 2 USB 3.0 interfaces, 1 3.5 mm audio interface
    • Výstup alarmu1 relay output
    • Všeobecné
    • MateriálMetal
    • Napájení100-240V～50/60Hz 1.4A
    • BarvaBlack
    • Spotřeba energie< 60 W
    • Provozní vlhkost0% to 93% (± 2%)
    • Laser Classification Class 1
    • Rozměry67 mm × 483 mm × 443.5 mm (2.63" × 19.02" × 17.46")
    • Rozměr balení186 mm x 600 mm x 580 mm (7.32" × 23.62" × 22.83")
    • S váhou baleníApprox. 10.5 kg (23.15 lb.)
    • VáhaApprox. 8.2 kg (18.08 lb.)
    • BaleníDevice × 1 Cable × 1 Fiber optic patch cord x 2 Flange dust cap x 2 Green terminal block connecter × 2 Quick Start Guide × 1
    • Provozní teplota-15 °C to 55 °C (5 °F to 131 °F)
    *Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

    Specifikace

    Specifikace
    Basic Parameter
    • Typ vláknaSingle mode (ITU-T G.652D)
    • Channel2
    • Single-Channel Detection Range5km
    • Positioning Accuracy5km：±5m
    • Frequency Response10Hz to 5kHz
    • Unit≤ 600 per channel
    • Alarm Response Time≤ 2s
    Funkce
    • Spouštěč alarmuIntrusion alarm, Fiber cut alarm, Tampering alarm
    • Indikátor LEDPower indicator: Solid blue: Device is connected to the power supply and powers on Blue light is not on: Device powers off Status indicator: Solid blue: Device works normally without any error Red light flashes slowly: Wired network error Solid red: Device error (including all-in-one model error, FPGA exception, HDD error, tampering alarm)
    • BuzzerStay buzzing for tampering alarm
    • SwitchRocker switch for power
    Komunikace
    • Způsob komunikaceWired communication
    Rozhraní
    • Vláknové rozhraní2 FC/APC fiber interfaces
    • Napájecí rozhraní1 power input interface with 100~240V AC power input
    • Function Interface1 1000 M network interface, 1 RS-232 interface, 1 RS-485 interface, 2 USB 3.0 interfaces, 1 3.5 mm audio interface
    • Výstup alarmu1 relay output
    Všeobecné
    • MateriálMetal
    • Napájení100-240V～50/60Hz 1.4A
    • BarvaBlack
    • Spotřeba energie< 60 W
    • Provozní vlhkost0% to 93% (± 2%)
    • Laser Classification Class 1
    • Rozměry67 mm × 483 mm × 443.5 mm (2.63" × 19.02" × 17.46")
    • Rozměr balení186 mm x 600 mm x 580 mm (7.32" × 23.62" × 22.83")
    • S váhou baleníApprox. 10.5 kg (23.15 lb.)
    • VáhaApprox. 8.2 kg (18.08 lb.)
    • BaleníDevice × 1 Cable × 1 Fiber optic patch cord x 2 Flange dust cap x 2 Green terminal block connecter × 2 Quick Start Guide × 1
    • Provozní teplota-15 °C to 55 °C (5 °F to 131 °F)
    *Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

    Download Center

    Prodej
    Technická podpora
    Odběr newsletteru
    Online podpora
    Kde nakupovat
    Jiné
    Kontakt
    Hik-Partner Pro close
    Hik-Partner Pro
    Security Business Assistant. At Your Fingertips. Learn more
    Hik-Partner Pro
    Scan and download the app
    Download
    Hik-Partner Pro
    Hik-Partner Pro
    back to top

    Get a better browsing experience

    You are using a web browser we don’t support. Please try one of the following options to have a better experience of our web content.