16 Port Gigabit Smart POE Switch

16 x gigabit PoE RJ45 ports, 1 × gigabit RJ45 port, 1 x gigabit fiber optical port
Total PoE power budget 130 W
Unified cloud management for security systems
Network topology at your fingertips
Remote troubleshooting
Visualized topology management
Up to 300 m long-range PoE transmission
6 kV surge protection

View Less

Data Sheet

Sales Inquiry

Available models:

DS-3E1518P-EI/M

Data Sheet

Všeobecné
KrytMetal material
Čistá hmotnost2.7 kg (5.9 lb)
Celková hmotnost2.9 kg (6.4 lb)
Rozměry (Š × V × H)440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')
Provozní teplota0 °C to 45 °C (0 °F to 113 °F)
Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Zdroj napájení100~240 VAC, 50/60 Hz, Max. 2.5 A
Režim instalaceRack (equipped with mounting ears)
Max. Spotřeba energie150 W
Spotřeba energie v nečinnosti20 W
Surge Protection6 KV

Síťové parametry
Přístavy16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
Tabulka adres MAC8 K
Spínací kapacita56 Gbps
Rychlost předávání paketů41.66 Mpps
Interní mezipaměť4.1 Mbits

Napájení PoE
PoE StandardIEEE 802.3af,IEEE 802.3at
PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortPoE: Ports 1 to 16
Max. Napájení portu30 W
Rozpočet napájení PoE130 W

Funkce softwaru
Dlouhý dosahPorts 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 16: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

Schválení
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Všeobecné

Kryt

Metal material

Čistá hmotnost

2.7 kg (5.9 lb)

Celková hmotnost

2.9 kg (6.4 lb)

Rozměry (Š × V × H)

440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')

Provozní teplota

0 °C to 45 °C (0 °F to 113 °F)

Skladovací teplota

-40 °C to 85 °C (-40 °F to 185 °F)

Provozní vlhkost

5% to 95% (no condensation)

Relative Humidity

5% to 95% (no condensation)

Zdroj napájení

100~240 VAC, 50/60 Hz, Max. 2.5 A

Režim instalace

Rack (equipped with mounting ears)

Max. Spotřeba energie

150 W

Spotřeba energie v nečinnosti

20 W

Surge Protection

6 KV

Síťové parametry

Přístavy

16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port

Tabulka adres MAC

8 K

Spínací kapacita

56 Gbps

Rychlost předávání paketů

41.66 Mpps

Interní mezipaměť

4.1 Mbits

Napájení PoE

PoE Standard

IEEE 802.3af,IEEE 802.3at

PoE napájecí kolík

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE Port

PoE: Ports 1 to 16

Max. Napájení portu

30 W

Rozpočet napájení PoE

130 W

Funkce softwaru

Dlouhý dosah

Ports 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 16: auto detect and restart the cameras that do not respond.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.

System Maintenance

Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

Schválení

EMC

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)

Bezpečnost

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chemie

CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Všeobecné

KrytMetal material
Čistá hmotnost2.7 kg (5.9 lb)
Celková hmotnost2.9 kg (6.4 lb)
Rozměry (Š × V × H)440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')
Provozní teplota0 °C to 45 °C (0 °F to 113 °F)
Skladovací teplota-40 °C to 85 °C (-40 °F to 185 °F)
Provozní vlhkost5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Zdroj napájení100~240 VAC, 50/60 Hz, Max. 2.5 A
Režim instalaceRack (equipped with mounting ears)
Max. Spotřeba energie150 W
Spotřeba energie v nečinnosti20 W
Surge Protection6 KV

Síťové parametry

Přístavy16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
Tabulka adres MAC8 K
Spínací kapacita56 Gbps
Rychlost předávání paketů41.66 Mpps
Interní mezipaměť4.1 Mbits

Napájení PoE

PoE StandardIEEE 802.3af,IEEE 802.3at
PoE napájecí kolík8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortPoE: Ports 1 to 16
Max. Napájení portu30 W
Rozpočet napájení PoE130 W

Funkce softwaru

Dlouhý dosahPorts 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port IsolationPorts 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 16: auto detect and restart the cameras that do not respond.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.

Schválení

EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
BezpečnostCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemieCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)